2014 KTM 450 SX-F XC-F SX-F FACTORY Service Repair Manual

MEANS OF REPRESENTATION

1. Symbols used
2. Formats used
3. 2 SAFETY ADVICE
4. Repair Manual
5. Safety advice
6. Degrees of risk and symbols
7. Work rules
8. IMPORTANT NOTES
9. Guarantee, warranty
10. Operating and auxiliary substances
11. Spare parts, accessories
12. Figures
13. SERIAL NUMBERS
14. Chassis number
15. Type label
16. Engine number
17. Fork part number
18. Shock absorber part number
19. MOTORCYCLE0
20. Raising the motorcycle with the lift stand0
21. Removing the motorcycle from the lift stand0
22. Starting0
23. Starting the motorcycle for a check1
24. FORK, TRIPLE CLAMP2
25. Adjusting the compression damping of the fork12
26. Adjusting the rebound damping of the fork3
27. Bleeding the fork legs4
28. Cleaning the dust boots of the fork legs4
29. Loosening the fork protection (SX-F EU/US, XC-F)
30. Positioning the fork protection (SX-F EU/US, XC-F)
31. Removing the fork legs5
32. Installing the fork legs5
33. Removing the fork protector (SX-F EU/US, XC-F)
34. Installing the fork protector (SX-F EU/US, XC-F)
35. 1 Removing the fork protector (SX-F Factory Edition)
36. 2 Installing the fork protector (SX-F Factory Edition)
37. Activating the Factory Start (SX-F Factory Edition)
38. SX-F EU, SX-F USA
39. Conducting major fork service
40. Conducting minor fork service
41. 4 Disassembling the fork legs
42. 4 Disassembling the cartridge
43. 4 Disassembling the piston rod
44. Disassembling the screw cap with the membrane holder
45. Disassembling the screw sleeve
46. Checking the fork legs
47. Checking the fork legs - during a minor fork service
48. 4Changing the pilot bushing
49. 4Assembling the screw sleeve
50. 4Assembling the screw cap with the membrane holder
51. 4Assembling the piston rod